Set Tool Kit

12V Car Battery Tester Cranking/Charging Test Tool With Printer SAE 100-3000

12V Car Battery Tester Cranking/Charging Test Tool With Printer SAE 100-3000
12V Car Battery Tester Cranking/Charging Test Tool With Printer SAE 100-3000
12V Car Battery Tester Cranking/Charging Test Tool With Printer SAE 100-3000
12V Car Battery Tester Cranking/Charging Test Tool With Printer SAE 100-3000
12V Car Battery Tester Cranking/Charging Test Tool With Printer SAE 100-3000
12V Car Battery Tester Cranking/Charging Test Tool With Printer SAE 100-3000
12V Car Battery Tester Cranking/Charging Test Tool With Printer SAE 100-3000
12V Car Battery Tester Cranking/Charging Test Tool With Printer SAE 100-3000
12V Car Battery Tester Cranking/Charging Test Tool With Printer SAE 100-3000
12V Car Battery Tester Cranking/Charging Test Tool With Printer SAE 100-3000
12V Car Battery Tester Cranking/Charging Test Tool With Printer SAE 100-3000
12V Car Battery Tester Cranking/Charging Test Tool With Printer SAE 100-3000

12V Car Battery Tester Cranking/Charging Test Tool With Printer SAE 100-3000    12V Car Battery Tester Cranking/Charging Test Tool With Printer SAE 100-3000
AUTOOL BT-660 Car Battery System Tester Cranking/Charging Test 12/24V W/ Printer. ALL ITEMS SAVE UP TO 50% OFF OR EVEN MORE ONLY IN THIS WEEK. Battery Conductance Tester BST660 adopts currently the world's most advanced conductance testing technology to easily, quickly and accurately measure the actual cold cranking amps capability of the vehicle starting battery, healthy state of the battery itself, and common fault of the vehicle starting system and charging system, which can help maintenance personnel to find the problem quickly and accurately, thus to achieve quick vehicle repair. BT-660 Battery System Analyzer Specification.

1Application12V automotive cranking lead acid battery and 12v/24v car system test. 3 Working Environment Temp:-10? 4 Special test clipDouble conductance Kelvin clamp. 5 Housing Material Acid-resistant ABS plastic.

Language :English, Spanish, German, French, Italian, Polish. After entering the forth function, then press OK key you can view the final test result.

About Printing function, please contact with customer service. How to operate this tester?

Connect the red test clamp with battery anode and the black one with cathode, the tester will power on automatically. Remember that voltage battery below 7.0V DC can't be tested properly, then press OK key to continue. According to the tester, you can press UP/DOWN key to choose. Battery Type: select your battery type, usually is "Regular Flooded".

Input testing standard: the standard which you can see the front of the battery , such as CCABCIDIN. If you can't find any info about the standard, you can choose GB standard. Choose GB standards would lead little tolerance. Input rated capacity: you can see the starting current standards in front of the battery. Then press OK key to start testing. After entering the second start system test functionthe press OK key as following. Starting the engine as prompted, tester will automatically complete the cranking test and display the result. Normally, cranking voltage value lower than 9.6V is regarded as abnormal and it is OK if it is higher than 9.6V. Test result of the tester includes actual cranking voltage and actual cranking time. When enter the charging test, tester will prompt "Loaded testing". Note: Do not shut down the engine during the test. All electrical appliance and device are in OFF state. Turn on/off any electrical appliance in the vehicle during the test will affect the accuracy of the test result. Operate accordingly to increase the engine rotating speed to 2500turns, and keep for 5 seconds. Tester starts the charging volt test after increase rev detected.

After the test finished, tester displays the effective charging volts, ripple test result and charging test result. The generator output normal, no problem detected. Check drive belt of the generator whether slip or running off. Check the connection between generator and battery is normal or not. Since most of the vehicle generators are using internal regulator, the generator assembly has to be replaced.

Some old style cars are using external regulator, then directly replace the regulator. The normal high volt of the voltage regulator is maximum 14.7±0.5V. If charging volt is too high, it will overcharge the battery. Therefore, the battery life will be shortened and troubles will be caused. No generator volt output is detected.

Check the generator connection cable, the drive belt of generator and engine whether. Diode Test: Through the test of charging current ripple, tester will find out whether the diode is normal or not. When ripple volt is too high, it proves at least one diode is damaged.

Check and replace the diode. Otherwise an Unpaid Item case will be opened to you. Please notice that auctions are considered a legal binding, for non-paying buyers, an Unpaid Item Dispute will be opened within a reasonable amount of waiting period. We are a professional worldwide wholesale company, with own factory located in China. We supply many products on Automobile consumer. And we are a professional Authorized dealers of Launch, Autel and Xtool. Also offer reasonable prices , excellent customer service and a reliable credit standing are our target! It now own four stocks in the world: China warehouse, United States warehouse, Germany warehouse.

It is now one of the biggest online commercial corporations in China. All messages be reply within 24hours. According to the tester, you can press UP/DOWN key to choose: Battery Test Cranking Test Charging Test Review Data Print Data Export Data to Computer.

The item "12V Car Battery Tester Cranking/Charging Test Tool With Printer SAE 100-3000" is in sale since Thursday, January 5, 2017. This item is in the category "eBay Motors\Automotive Tools & Supplies\Battery Testers & Chargers\Battery Testers".

The seller is "autoolsupplier" and is located in Cranbury, New Jersey. This item can be shipped to United States.

  • Brand: AUTOOL
  • Manufacturer Part Number: Does Not Apply
  • Voltage: 12/24V
  • Warranty: 3 Year
  • Country/Region of Manufacture: China
  • Type: Tool Kit
  • Model Name: BT-660
  • Item Type: Auto Battery Tester
  • Weight: 0.7 KG
  • Voltage Measure Range: 7-30VDC
  • Language: English,Spanish, German, French,Italian, Polish
  • UPC: 707273309266
  • Battery Test Type: AGM
  • Features: LCD Display
  • Housing Material: Acid-resistant ABS plastic
  • Measure Range: 30AH-200AH
  • Working Environment Temp:: -10-50
  • Accessories: Carrying Case
  • Set or Single Item: Set


12V Car Battery Tester Cranking/Charging Test Tool With Printer SAE 100-3000    12V Car Battery Tester Cranking/Charging Test Tool With Printer SAE 100-3000